Square Straight Cruciform Poles

The lighting standards listed here are designed for ground-mounted applications. Standards mounted on structures require factory consultation. All of our products are available as direct-burial poles — contact Inside Sales for exact catalog numbers and pricing of such poles.

 

Pole Shaft  SSA-CR 

The cruciform pole shaft is extruded from all new seamless 6000 series alloy aluminum tubing and is heat treated to produce a T6 temper. The standards may be drilled to accept side arm luminaires, in which case a matching top closure is provided. The standard may also be provided with a pole-top tenon.

Anchor BaseSSA-CR_AB

Cast from A356 alloy aluminum, the anchor base is heat treated to produce a T6 condition and inserted into the anchor base casting. The two pieces are joined by a continuous circumferential weld at the outside top and inside bottom of the anchor base. The anchor bolts and nuts recess in the base casting, sitting flush, and are covered by four (4) tamper-resistant aluminum nut cover discs.

Anchor Bolts

Fabricated from commercial-quality, hot-rolled, weldable-grade carbon Cruciform_AnchorBolts2steel with a guaranteed minimum yield strength of 50,000 psi after facbrication. The anchor bolts conform to ASTM A153. The bolts have an “L” bend on the end and are threaded to accept the nuts and washers for leveling and anchoring of the pole. The threads plus a minimum of 3″ of the bolt are hot-dipped galvanized. Four (4) anchor bolts, complete Cruciform_AnchorBolts1with two (2) hex nuts and two (2) flat washers are supplied with each pole, unless otherwise specified.

Handholes

The pole shall be provided with a peripherally reinforced surface-mounted covered handhole. This wire-access opening is sized 2″x4″. The handhole for the 4″ cruciform standard is placed 12″ above the bottom of the pole. The placement of the handhole for the 6″ cruciform standard is 18″ above the bottom of the pole.

 

Product Line

  • 105-CR4018-08
  • 8
  • 105-CR4018-10
  • 10
  • 105-CR4018-12
  • 12
  • 105-CR4018-15
  • 15
  • 105-CR4018-18
  • 18
  • 105-CR6018-18
  • 18
  • 105-CR4018-20
  • 20
  • 105-CR6018-20
  • 20
  • 105-CR6018-25
  • 25
  • 105-CR6018-30
  • 30
Catalog NumberMounting HeightWeight (lb)Effective Projected AreaShaft DimensionsBase InfoCutsheetTemplate
8090100Sq.Wall Thick.Anchor BoltBolt Circle
105-CR4018-08835030.223.518.64.188.75 x 208.5 - 9.5View
105-CR4018-101026023.518.014.14.188.75 x 208.5 - 9.5View
105-CR4018-121226018.413.910.74.188.75 x 208.5 - 9.5View
105-CR4018-151520010.67.75.64.188.75 x 208.5 - 9.5View
105-CR4018-18182007.24.93.24.188.75 x 208.5 - 9.5View
105-CR6018-181826021.715.911.76.1881 x 4012 - 13View
105-CR4018-20201005.83.62.04.188.75 x 208.5 - 9.5View
105-CR6018-202015018.313.09.26.1881 x 4012 - 13View
105-CR6018-252515011.06.83.76.1881 x 4012 - 13View
105-CR6018-30302604.51.46.1881 x 4012 - 13View

About Us

Lyte Poles was founded to meet the continued focus on partner demands for high-quality, low-cost, and technologically advanced products. Our commitment to superb partner service and quality makes us the manufacturer partner for today and tomorrow.

read more.