Archives: Products

11-29-2016

pole caps

Our pole caps are constructed of high-grade black composite and are designed to prevent water and other debris from entering pole shafts. Pole caps are included in the small-parts assembly kits accompanying each pole order. ready for a quote? Are…

01-11-2015

square tapered steel poles

The lighting standards listed here are designed for ground-mounted applications. Standards mounted on structures require factory consultation. All of our products are available as direct-burial poles — contact our Project Management team for exact catalog numbers and pricing of such…

01-27-2015

vibration dampener

Our vibration dampener is used to minimize the effects of wind-induced Aeolian Vibration. When this type of vibration is identified (it is site specific and unforeseeable), a dampening system is used to mitigate the stress effects. The vibration dampening system…

01-27-2015

universal fixture mount

Square straight steel poles, both 4" and 5", with our standard dark bronze powder coat finish may be supplied with our patented universal fixture mount. The pole will come with either the side-mount fixture application or the tenon mount. All…

01-27-2015

custom steel base cover

Our custom steel base covers are manufactured from sheet metal steel and designed to fit per the requirements of the lighting standard's base plate. ready for a quote? Are you a Lyte Poles sales partner? You can fill out this…

01-11-2015

spoke brackets

Our series SB pole top mounting brackets slip fit 2" pipe size pole tenon standards. Arms are constructed of 2" pipe size. Each bracket has a maximum capacity of one (1) to four (4) luminaires, depending on mounting configuration. Brackets…

01-27-2015

welded coupling

The welded coupling is an internally threaded hub that is welded to the pole shaft. The threads are per the MPT Code based on the coupling size. ready for a quote? Are you a Lyte Poles sales partner? You can…

01-11-2015

square mounting brackets

Our SMB brackets are fabricated from mild carbon steel pipe and tubing. Fixture mounting tenons are vertical to accommodate most common LED fixtures. Brackets are designed to slip fit (Ø2.38 OD) pole top tenons. Slip fitters for Ø3.00 & Ø4.00 tenons are…

01-28-2015

tapered elliptical arm brackets

Arms are a tapered elliptical design made of 6063 alloy extruded aluminum tube with 2-3/8" OD luminaire end. The arm is joined to the attachment system by a continuous circumferential weld. All arms have a 32" rise. These brackets are…

01-28-2015

top-mounted cross arm brackets

Our CRT brackets are fabricated from mild carbon rectangular steel tubing with horizontal fixture mounting plates. They are designed to be top mounted to the pole shaft. Brackets are finished to match the pole. ready for a quote? Are you…

About Us

Lyte Poles was founded to meet the continued focus on partner demands for high-quality, low-cost, and technologically advanced products. Our commitment to superb partner service and quality makes us the manufacturer partner for today and tomorrow.

read more.