Archives: Products

01-27-2015

mounting bracket

Our mounting bracket consists of two welded sections of angle iron and a welded coupling designed for wire protection. The sizing of the angle iron, spacing between the angle iron, and size of the welded coupling are based on project…

01-27-2015

pole top tenon adaptors

Our pole top tenon adapters allow a side mount fixture to be affixed to a pole top that was originally supplied with a tenon. The pole top tenon adapter is provided to match the the size of the pole and…

01-27-2015

welded nipple

The welded nipple is an externally threaded hub that is welded to the pole shaft. The threads are per the MPT Code based on the nipple size. ready for a quote? Are you a Lyte Poles sales partner? You can…

01-27-2015

lowering winch

A portable lowering winch is required for all straight square hinged steel poles. This unit is a manual lowering device that connects to the pole shaft and allows the user to safely lower the top portion of the pole for…

01-11-2015

pole top floodlight mounting brackets

Our series PCB pole top floodlight mounting brackets for wood poles are constructed of 2'' schedule 40 pipe. The brackets are easily clamped onto 5-13" wooden poles. For smaller pole diameters, contact our Project Management department. The maximum capacity for…

01-27-2015

ABS base covers

To enhance the appearance of our steel poles, these composite enclosures conceal the base plate and anchor bolts, use push pins to connect the two-piece design, and are supplied to match the lighting standard. Our ABC Base Covers are available…

01-11-2015

cross arm brackets for steel poles

Our series PXB cross arm brackets are constructed with 3-1/2" x 1-1/2" steel angle iron. The brackets found here are design for direct mounting to metal poles. Each bracket has a maximum capacity of two (2), three (3), four (4),…

01-11-2015

cross arm brackets for wood poles

Our series PBXW cross arm brackets are constructed with 3-1/2″ x 1-1/2″ steel angle iron. The brackets found here are design for direct mounting to wood poles. Each bracket has a maximum capacity of two (2), three (3), four (4),…

01-27-2015

mounting plate

Our mounting plate consists of a flat plate with drilled and tapped holes for mounting and a center wire access hole to allow for the mounting of a camera or other loading based on project requirements. ready for a quote?…

01-28-2015

pole top reducers

Our PTR brackets are fabricated from mild carbon steel pipe and tubing. Brackets are finished to match pole. ready for a quote? Are you a Lyte Poles sales partner? You can fill out this form to request a quote. If you’re…

About Us

Lyte Poles was founded to meet the continued focus on partner demands for high-quality, low-cost, and technologically advanced products. Our commitment to superb partner service and quality makes us the manufacturer partner for today and tomorrow.

read more.