Archives: Products

Our series UMB pole top upsweep mounting brackets slip fit 2" pipe size pole tenon standard. Bracket arms are 2" pipe size. Each bracket has a maximum capacity of one (1) to four (4) luminaires, depending on mounting configurations. Brackets…

Our series SCA multiple mounting cross arm (also knows as, shoebox cross arm) brackets are constructed from square or rectangular steel tubing. The brackets are designed to slip fit 2-3/8" OD x 4"-long or 4" OD x 6"-long tenons. Each…

Our PTAR brackets are fabricated from mild carbon steel pipe and tubing. Brackets are finished to match pole. Click on image for a more detailed view. ready for a quote? Are you a Lyte Poles sales partner? You can fill out…

Our CRS brackets are fabricated from mild carbon rectangular steel tubing with horizontal fixture mounting plates. They are designed to be side mounted to the pole shaft using U-bolts. U-bolts and mounting plate sizing is determined by the pole shaft…

Our two-tier adaptor plate is one of our most widely requested accessories. When anchor bolts are set in the field incorrectly, the two-tier adaptor plate greatly reduces the labor required to correct the situation by fabricating the bottom base plate…

GFCI mounting provision is welded into the pole shaft with a top and bottom tab to allow for the ground fault circuit interrupter to be installed in the field. Supplied with a weatherproof In-Use-Cover that is equipped with locking hasp…

Each banner arm that we supply is engineered to reduce banner loading. Our banner arms are offered as either bolt-on or banded attachment options. ready for a quote? Are you a Lyte Poles sales partner? You can fill out this…

Our flag holder accessory is available with a standard length of 6", unless otherwise specified. Each flag holder is manufactured with a back mounting plate and the accompanying mounting hardware is supplied. ready for a quote? Are you a Lyte…

These camera mounting options allow you to customize our lighting standards to allow for various camera configurations, depending on project requirements. ready for a quote? Are you a Lyte Poles sales partner? You can fill out this form to request…

Our mounting bracket consists of two welded sections of angle iron and a welded coupling designed for wire protection. The sizing of the angle iron, spacing between the angle iron, and size of the welded coupling are based on project…